• Complete per ISSA TB 109 & 147A

Includes:

• Single reciprocating wheel for
  traffic count design
• Measurement of excess bitumen and multiplayer rutting potential
• Complete with 20, 24 gauge-mounting plaques
• .125”, .188”, .250”, .313”, .375”, .375”, .500” x 2” x 15” molds (3.2, 4.8, 6.4, 8.0, 9.5, 12.7 mm)
• Sand frame and cover
• .33 HP 115/120 V 60 Hz motor –
  less lead shot weights
• 235 lbs. approximate shipping weight
  16” x 17” x 56”

• Complete to ISSA TB144
• Aggregate, filler-bitumen compatibility
• Tumbling pill abrasion test machine

Includes:

• 4 pairs (8) tumbling shuttle cylinders
• 1/6 HP 115/230 V 50/60 Hz
• 367 lbs. approximate shipping weight
• 41” x 30” x 27”
• Also applies to 230 V 50/60 Hz

Items below usually required with
Schulze-Breuer purchase:

• Schulze-Breuer 40 gram pill molds
  (ram, case , base)
• Schulze-Breuer constant force
  pneumatic pill press - up to 1 ton capacity
• 96 lbs. approximate shipping weight
• 10” x 25” x 16”
• 40 psi = 2,000 lbs. force
• Ruck adhesion and integrity procedure baskets (set of 4)

Optional –

• Additional abrasion tube shuttle cylinder assemblies (machine will accept 6 pairs)

• Complete per ISSA TB 100 and
  ASTM D3910

Modified Hobart N-50 includes:

• 5-quart mixer with 5-quart mixer bowl, beater, whip, quick clamp mounting base
• Spun aluminum pan
• Special design quick-change abrasion head
• Raised lip specimen mold (1/4”)
• 30 lb. roofing felt – 10 pieces
• Hose – 10 pieces and 1 head
• Squeegee
• 2 replacement pins
• 110V / 60 Hz / 1 phase
• 230V / 50 Hz / 1 phase
• Please specify voltage
• 145 lbs. approximate shipping weight
• 23” x 23” x 23”
• Modified Hobart HL 120 - 12-quart mixer also available

• Complete to ISSA TB 139

Includes:

• 35 kg-cm torque wrench
• 6 mm and 10 mm x 60 mm specimen molds (5 each)
• Cohesion foot with pad
• Spare rubber foot – 5 each
• 100 and 220 grit calibration paper (5 each)
• Ottawa Calibration Sand
• 100 mm x 100 mm felt squares (100)
• Double rod end air cylinder 28.5 mm diameter with 8 mm diameter rods and
  76 mm stroke
• 35 lbs. approximate shipping weight
  14 ½” x 10” x 15”

آزمایش چرخ بارگذاری

دستگاه آزمایش چرخ بارکش مطابق روش­های آزمون ISSA TB 109 و ISSA TB 147A شامل اجزای زیر

• چرخ تک از جنس لاستیک نرم به قطر 2/76 میلیمتر با بار 7/56 کیلوگرم و مسیر حرکت رفت و برگشتی 5/30 سانتیمتر با سرعت 44 سیکل در دقیقه
• قالب نمونه به ضخامت 7/12 میلیمتر، به ابعاد داخلی 8/50 میلیمتر × 381 میلیمتر
• قاب ماسه و پوشش آن
• کاسه اختلاط ته گرد با دیواره­ ضخیم و مستحکم به همراه قاشق اختلاط با طول کافی