Corrosion of Cast Aluminium Alloys

The apparatus consists of a base supporting one or two heat-transfer corrosion cells. Cells are rated for a working pressure up to 40 psi and working temperature up to 160 °C. An electronic timer permits to set the test duration while an electronic thermostat is used to control the temperature.

• Enamel finished benchtop steel base.
• Safety screen surrounding the cell(s).
• Heat transfer corrosion cell composed by a Pyrex-glass cell with stainless steel top and bottom plates.
• Stainless steel heat transfer bar. 950 W coaxial heater piloted through a solid state relay.
• Stainless steel manifold mounted on the top plate and equipped with purge valve, pressure relief valve and gage.
• Filling nozzle with cap on the top plate.
• Four stainless steel rods for assembly.
• Electronic thermoregulator with PID action and built-in digital display. Probe: type K thermocouple. In the twin-unit, an independent thermostat for each position is adopted.
• Working range: from ambient to 160°C.
• Safety device against overheating.
• Electronic timer: it is possible to preset the test duration. When the preset time is elapsed, the heater is automatically turned off. In the twin-unit, an independent timer for each position is adopted.
• English written user manual.
• For 220 V/50 Hz connections. Power consumption: 2200 W (twin unit) and 1100 W (single unit).
• Dimensions (l x w x h): 800 x 350 x 850h mm (twin unit) and 450 x 350 x 850h mm (single unit).
• CE marked.

AD4340-100        Single-unit apparatus

AD4340-110        Double-unit apparatus

ACCESSORIES

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES

AD4340-C00        Specimens

AD4340-C01        Pyrex glass cell   

AD4340-C02        Viton gasket

AD4340-C03        Type K thermocouple

مشاهده کاتالوگ