• فارسی
  • English

Phone: +982177747400

  • About Us
  • Services
  • News
  • Contact
  • فارسی
  • English

Phone: +982177747400

Menu
Search
  • Petroleum
  • Bitumen
  • Asphalt
  • Concrete
  • Cement – Mortar
  • Aggregates – Rock
  • Soil
  • Steel
  • General Equipment
Home Petroleum Oxidation Stability Tester Oxidation Stability Dry Bath
Click to enlarge

Oxidation Stability Dry Bath

For evaluation of the oxidation stability of inhibited steam-turbine oils in the presence of oxygen, water, and copper and iron metals at an elevated temperature. This test method is limited to a maximum testing time of 10 000 h. This test method is also used for testing other oils, such as hydraulic oils and circulating oils having a specific gravity less than that of water and containing rust and oxidation inhibitors

Measurement of the inherent stability of middle distillate petroleum fuels under specified oxidizing conditions at 95°C (203°F)

Determination of the oxidation characteristics of extreme-pressure fluid lubricants, gear oils, or mineral oils.

Evaluate the tendency of inhibited mineral oil based steam turbine lubricants and mineral oil based anti-wear hydraulic oils to corrode copper catalyst metal and to form sludge during oxidation in the presence of oxygen, water, and copper and iron metals at an elevated temperature. The test method is also used for testing circulating oils having a specific gravity less than that of water and containing rust and oxidation inhibitors.

Measurement of the oxidation stability of biodiesel (B100) blendstock as specified in Specification D6751 and blends of biodiesel with middle distillate petroleum fuels, including B6 to B20 blends as specified in Specification D7467 under specified oxidizing conditions at 95°C (203°F). Specifically, the oxidation stability is assessed by the formation and measurement of insoluble degradation materials.

6-places stainless steel tank, insulated double wall, double bottom for supporting the cells, a 6-place refrigerating system with pipelines for water inlet and outlet. The temperature control is a thermoregulator PID with PT100 probe class A and overtemperature alarm, stainless steel heater, cooling coil, motor stirrer, insulated double wall, safety internal level for low liquid with warning lamp.

– Temperature: from ambient to 130°C (266°F)
– Stability: ±0.1°C
– Power supply: 220V 50/60Hz
– Power 1800W
– Dimensions: 51x55x66 cm
– Weight: 77 kg

مشاهده کاتالوگ

SKU: 1457 Category: Oxidation Stability Tester
Share:
  • Additional information
Additional information
Model

1920/S/4

Standard

ASTM D943 , ASTM D2274 , ASTM D7462 , ASTM D2893 , ASTM D4310 ,ISO 4263 , ISO 12205 , DIN 51587 , IP 388 , IP 157 , IP 388

Related products

Buy product

Corrosiveness and oxidation stability of light oils

Buy product

Fully automated induction period and oxidation stability tester

Buy product

Gasoline, Aviation Fuels

Buy product

Oxidation characteristics of distillate fuel oil

Buy product

Oxidation characteristics of inhibited mineral oils

Buy product

Oxidation characteristics of inhibited mineral oils

Buy product

Oxidation Stability Bath Apparatus

Buy product

Oxidation Stability Greases Bath

    Phone: +98 2177747400   |   Fax: +98 2177747402   |   Email: info[at]atppad.com   |   No. 77, Farjam Ave., Tehran, Iran
    Phone: +98 2177747400
    Fax: +98 2177747402
    Email: info[at]atppad.com
    No. 77, Farjam Ave., Tehran, Iran
    • About Us
    • Services
    • News
    • Contact
    • About Us
    • Services
    • News
    • Contact
    Copyright © 2022 atppad.ir, All rights reserved.
    Designed & Developed By Ali Seyedi
    • Categories
    • Menu
    • About Us
    • Services
    • News
    • Contact
    • Petroleum
    • Bitumen
    • Asphalt
    • Concrete
    • Cement – Mortar
    • Aggregates – Rock
    • Soil
    • Steel
    • General Equipment