Twin-unit Foaming Bath

The Foaming test apparatus consists of a steel frame supporting two Pyrex jars with a cover that allows to insert and fix two cylinders without necessity of any steel ring to avoid floatation, four high precision flowmeters and a control box containing all the electronics.

• Steel frame supporting two Pyrex jars, one for tests at 24 and one for tests at 93.5°C.
• Aluminium covers with two holes for the cylinders: locking clamps to hold the cylinders in position and thermometer jacket.
• Electrical bath stirrer on the jar cover.
• Stainless steel heaters.
• Stainless steel cooling coils: when connected to a cold water source, it permits to keep the bath temperature (24°C) prescribed in ASTM D 892 sequence 1.
• High precision variable area flowmeters complete with needle valves, supports and diffuser connections. Individual calibration certificates.
• Microprocessor thermoregulator with PID action and built-in digital display 0.1°C accuracy (one for each bath). Probe: Pt100 RTD.
• Safety devices against overheating and low level on both jars.
• Easy access control box.
• English written user’s guide and installation instructions.
• For 220V / 50Hz connections. Power consumption 2200 W.
• Dimensions (l x w x h): mm 1050 x 420 x 680. Weight: kg 60 approx.
• CE marked.
• Version with mass flow controller and software also available.

AD0892-200        Twin-unit apparatus

ACCESSORIES Foaming test

AD0892-A00        Wet test meter

AD0892-A01        Officially certified wet test meter

AD0892-A02        Air pump

AD0892-A03        Glass drying tower

CAL001                PT100 simulator

CAL002                Officially certified PT100 simulator

CONSUMABLES Foaming test

AD0892-C00        Graduate pyrex glass cylinder

AD0892-C01        Rubber stopper with air inlet and outlet

AD0892-C02        Norton spherical Alundum gas diffuser stone (certified for permeability and pore size)

مشاهده کاتالوگ