A modification of the universal fuel and oil quality analyzer Octane Tester SX-200 is intended for detection of type and measurement of octane number of gasoline, cetane number of diesel fuel, and also for estimation of diesel fuel freezing temperature, purity level, and quality of motor, industrial and transformer (dielectric puncture potential) oil.
Capability to make an individual measurement program (according to customer's requirements) allows to adjust the instrument to analyze the quality of any gasoline. New microprocessor is used for quick and accurate processing in analyzer. The device measures and displays octane number RON, MON and antiknock index AKI (RON+MON)/2 simultaneously. The instrument has additional 220V power supply, battery charge indicator, display backlight
The Octane Tester SX-200 is recommended for the use at filling stations, petroleum refineries, Custom-houses, environmental and supervisory organizations, electric power stations as a portable universal device to control fuel and oil quality.
Technical specifications of Octane Tester SHATOX SX-200
Parameter description |
Value |
Measurement range of octane numbers (ON), ON units |
40-120 |
Acceptable limit of octane number measurement basic error, ON units (max) |
0.5 |
Limit of acceptable difference between parallel octane number measurements, ON units (max) |
±0.2 |
Measurement range of cetane numbers (CN), CN units |
20-100 |
Acceptable limit of cetane number measurement error, CN units (max) |
±1.0 |
Limit of acceptable difference between parallel cetane number measurements, CN units (max) |
± 0.5 |
Motor oil purity level measurement range, % max |
95 |
Acceptable limit of motor oil purity level measurement error, % max |
0.1 |
Limit of acceptable difference between parallel motor oil purity level measurements, % max |
0.01 |
Fuel and oil dielectric conductivity measurement range, units |
1-5 |
Acceptable limit of dielectric conductivity measurement error, units (max) |
0.001 |
Limit of acceptable difference between parallel dielectric conductivity measurements, units (max) |
0.001 |
Transformer oil disruption voltage measurement range, kV |
5-100 |
Acceptable limit of transformer oil disruption voltage measurement error, kV (max) |
1 |
Limit of acceptable difference between parallel transformer oil disruption voltage measurements, V (max) |
0.2 |
Transformer oil dielectric dissipation measurement range, % |
0.01-5 |
Acceptable limit of transformer oil dielectric dissipation measurement error, % |
0.01 |
Limit of acceptable difference between parallel transformer oil dielectric dissipation measurements, units (max) |
0.001 |
Measurement time, s |
1-5 |
Threshold of low battery voltage indication, V |
5.4 |
overall dimensions
|
60 х 100 |
Mass of octanemeter, gr |
680 |
Mean-time-between-failures, hour (min) |
1000 |
The delivery package of Octane Meter SX-200 consists of the following components:
Portable laboratory for sample taking and on-line acceptance analysis of fuel with standard and express methods. The analysis results allow to estimate with great accuracy the fuel quality in conditions when analysis in stationary labs is not possible. The laboratory set allows to measure up 19 basic parameters of fuel quality. The test methods are as follows: Institute of Petroleum Chemistry, GOST, 25 GosNII Himmotologiyi MP RF, Joint stock company Sorbpolimer.
№ |
Description of quality metrics |
Method of testing |
1. |
Determination of gas octane number by motor and research methods |
method of the Institute of petroleum chemistry |
2. |
Determination of diesel fuel cetane number |
method of the Institute |
3. |
Determination of lead content in gas |
M 32.137-9625 GosNII MO RF method |
4. |
Oil product density detection |
GOST 3900-85 |
5. |
Determination of mechanical impurities and water |
GOST 2084-77 Paragraph 4.4 |
6. |
Car gas color detection |
Visual |
7. |
Content determination of heavy hydrocarbon |
GOST 2084-77 Paragraph 4.7 |
8. |
Resin content determination in gasoline |
method 25 of GosNII MO RF |
9. |
Determination of liquid coolant content and freezing temperature by its density. |
User's manual for cooling liquid handling |
10. |
Sampling of oil product |
GOST 2517-85 |
11. |
Quantitative determination of water in tank (tank-truck, tank wagon) |
GOST 2517-85 |
12. |
Oil product bottom sampling from tanks, and determination of settling water, and mechanical impurities. |
GOST 2517-85 |
13. |
Determination of water content in anti-crystallization additives. |
GOST 8313-88 |
14. |
Determination of anti-crystallization liquids in jet engine fuels. |
Method of JSC Sorbpolimer |
15. |
Determination of undissolved water content |
Method of JSC Sorbpolimer |
16. |
Determination of total water content (quantitative method) |
Method of JSC Sorbpolimer |
17. |
Determination of acid electrolyte density |
GOST 3900-85 |
18. |
Determination of cleaning additives content in gasoline |
Method 25 of GosNII MO RF |
19. |
Determination of ferrocene content in gasoline |
Method of JSC Sorbpolimer |
№ |
Element |
measure |
quantity |
1. |
Octane tester |
set |
1 |
2. |
Sample collecting device |
set |
1 |
3. |
Areometer ANT-2 0.670-0.750 |
pcs. |
1 |
4. |
Areometer ANT-2 0.750-0.830 |
pcs. |
1 |
5. |
Areometer ANT-2 0.830-0.910 |
pcs. |
1 |
6. |
Spare batteries |
pcs. |
4 |
7. |
Graduated cylinder 100 ml |
pcs. |
1 |
8. |
Graduated cylinder 250 ml |
pcs. |
1 |
9. |
Areometer AON-1 1.060-1.120 |
pcs. |
1 |
10. |
Areometer AON-1 1.240-1.300 |
pcs. |
1 |
11. |
Areometer AON-1 1.360-1.420 |
pcs. |
1 |
12. |
Measuring beaker 100 ml |
pcs. |
1 |
13. |
Water indicator paste |
g. |
40 |
14. |
Evaporation bowl |
pcs. |
1 |
15. |
Indicator tubes CF (yellow stripe) for detection of ferrocenes in gasoline |
pcs. |
10 |
16. |
Indicator tubes TEL (red stripe) for detection of lead (tetraethyl lead) in gasoline |
pcs. |
10 |
17. |
Indicator tubes WAA (no marking) for detection of fuel detergents in gasoline, water-soluble acids and alkali in light oil products |
pcs. |
10 |
18. |
Indicator tubes ACL (black stripe) for detection of anticrystallizing agents in fuel for jet engines |
pcs. |
10 |
19. |
Indicator tubes CW-10 (blue stripe) for detection of accumulated water in motor fuel |
pcs. |
10 |
20. |
Indicator tubes CW-50 (orange stripe) for detection of dissolved water in anticrystallizing agents, alcohols, aldehydes and ketones |
pcs. |
10 |
21. |
Indicator tubes UW-15 (green stripe) for detection of undissolved water in motor fuel |
pcs. |
10 |
22. |
Plastic dropping pipette |
pcs. |
1 |
23. |
Syringe |
pcs. |
5 |
24. |
Hard Eminent case |
pcs. |
1 |
25. |
Lab set documentation |
set |
1 |
26. |
Ruler |
pcs. |
1 |
27. |
A4 paper |
set |
1 |
28. |
Pencil |
pcs. |
1 |
29. |
Modeling clay |
g |
10 |
30. |
Filter paper |
set |
1 |
31. |
Pusher for indicator tubes |
pcs. |
1 |
32. |
Bulb rubber syringe |
pcs |
1 |
33. |
CITIZEN calculator |
pcs |
1 |
№ |
Document |
1. |
The compound and freezing temperature test of the refrigerating fluid by its density |
2. |
Express method for determination of gum content in motor petrol |
3. |
Methods for express determination of heavy hydrocarbons content in petrol |
4. |
Practical recommendations for fuel density determination by areometer in accordance with GOST 3900-85 |
5. |
Practical recommendations for fuel density determination by diagram method |
6. |
Practical recommendations for electrolyte density determination |
7. |
GOST 3900-85 Methods for determination of density |
8. |
Methods for express determination of detergent additive content in petrol |
9. |
D 1298 – 99e2 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method |
10. |
ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products |
11. |
Express determination of lead content in petrol |
12. |
Method for determination of ferrocene content in gasoline (IT-CF). Certificate for IT-CF |
13. |
Method for tetraethyl-lead determination in motor gasoline using the indicator-adsorption method (IT-TEL). Certificate for IT-TEL |
14. |
Method for determination of qualitative definition of water-soluble acids and alkalis in light mineral oil ( IT-WAA ). Certificate for IT-WAA |
15. |
Method for determination of anti-crystallization liquids (ACL) in jet aircraft fuels using the indicator-adsorption method (IT-ACL). Certificate for IT-ACL |
16. |
Method for determination of water content in anti-crystallization liquids using the indicator-adsorption method (IT-CW-50). Certificate for IT-CW-50 |
17. |
Method for determination of total water in motor fuels using the indicator-adsorption method (IT-CW-10). Certificate for IT-CW-10 |
18. |
Method for determination of undissolved water in motor fuels using the indicator-adsorption method (IT-UW-15). Certificate for IT-UW-15 |
19. |
Certificate for sampling unit PPN-150 |
20. |
User manual for Octane meter |
21. |
Technical capabilities of laboratory set 2M7 |
22. |
Laboratory set elements lay-out |
This is aimed for sampling and carrying out commissioning tests of all kinds of fuels outside of laboratory. This laboratory set comprising octanemeter SX-100M, SX-100K, SX-200 or SX-300 analyzer.
All the necessary devices are packed in a special case. We offer you one of the most complete measuring sets for express-control over fuel quality in field conditions. Due to its small dimensions (case) as well as constant availability for service, the laboratory set provides the possibility of express-analysis of quality index for incoming fuel in any place and at the earliest possible date. The laboratory set is used for oil products sampling and seabed sampling of oil products from reservoirs. It also serves to determine the presence of sewage and mechanical impurities.
جهت تعیین سریع اکتان بنزین موتور و مناسب برای تعیین دمای مایع مورد آزمایش و سوخت دیزلی
شرایط عملکرد:
دمای محیط : ۱۰- الی ۳۰ درجه سانتی گراد
رطوبت: ۳۰ الی ۸۰ درصد
فشاری هوا : ۸۴ الی ۱۰۶ کیلو پاسکال
مشخصات فنی:
محدوده اندازه گیری میزان اکتان: ۴۰ الی ۱۲۰
محدوده انداه گیری ستان: ۲۰ الی ۱۰۰
میزان خطالی اندازه گیری : ۰/۵
مدت زمان اندازه گیری: کمتر از ۱۰ ثانیه
ساخت کمپانی Shatox روسیه
جهت تعیین اکتان بنزین ، ستان دیزل و دمای انجماد و نوع سوخت دیزلی
مشخصات فنی:
محدوده اندازه گیری اکتان: ۴۰ الی ۱۲۵
خطای اندازه گیری: ۰/۵
مدت زمان اندازه گیری: ۱ الی ۵ ثانیه
طول عمر تجهیزات : ۶ سال
ابعاد: ۴۰*۲۱۰*۱۰۰ میلی متر
وزنک ۸۵۰ گرم
ساخت کمپانی Shatox روسیه
جهت تعیین اکتان بنزین ، ستان دیزل ، دمای انجماد و نوع سوخت دیزلی و اندازه گیری رسانایی
مشخصات فنی :
محدوده اندازه گیری میزان اکتان: ۴۰ الی ۱۲۰
خطای اندازه گیری: ۰/۵
محدوده اندازه گیری میزان ستان: ۲۰ الی ۱۰۰
محدوده اندازه گیری میزان خلوص روغن: ۹۵ درصد
محدوده اندازه گیری رسانایی روغن و سوخت ۱ الی ۵
مدت زمان اندازه گیری : ۱ الی ۵ ثانیه
ابعاد : ۲۵*۲۱۰*۱۰۰ میلی متر
وزن: ۶۸۰ گرم
ساخت کمپانی Shatox روسیه
جهت انجام آزمایش بر روی تمامی سوخت ها بیرون از محیط آزمایشگاهی که امکان اندازه گیری ۱۹ پارامتر اصلی سوخت مورد آزمایش را فراهم میکند. شامل اکتان سنج SX-100M, SX-100K, SX-200 , SX-300