The Vacuum Degassing Oven (VDO) is designed to remove air bubbles created during the in-service oxidative aging of asphalt binder by the PAV.
We are excited to introduce the NEXT generation of our Vacuum Degassing Oven, the VDO Touch! We’ve kept the same great features our VDO was known for and incorporated some new ones to enable the user even more freedom. Designed to meet AASHTO R28, ASTM D6521, and EN 14769 test standards.
Electrical Requirements: 230 VAC, 1 Ph, 50/60 Hz, or 115 VAC, 1Ph, 60Hz, 10A.
HM-59 and HM-73 Bending Beam Rheometers (BBR) by ATS measure the flexural creep stiffness of asphalt binder from ambient to -40°C to predict low-temperature thermal cracking of asphalt pavements. Special molds form small beam samples of binder for testing, and deflection of the beam is recorded as a constant load is applied. Load, displacement and bath temperature are displayed in real time via tabular and graphic forms.
Both models use an air bearing system to assure reliable loading with accurate and repeatable results. A linear variable displacement transducer (LVDT) with a range of 6.35mm and accuracy to ±2µm measures deflection. The stainless steel three-point bend apparatus is easily removed and reinstalled in the base unit for convenient sample preparation and loading.
A fluid bath controls temperature of the Ethylene Glycol/Water/Methanol mixture down to -40°C (-40°F). Process temperature is controlled by two independent platinum RTD temperature transducers to maintain stability. Both models fully comply with ASTM/AASHTO requirements. A source of clean, dry, compressed air at 50 PSIG minimum must be provided by the user.
Models come with five aluminum specimen Molds with mylar strips, a Calibration Kit with required weights, and Confidence Beam. Calibrated test weights and a certified LVDT NIST-traceable standard are also provided.
HM-59 ATS Bending Beam Rheometer uses a desktop computer with pre-loaded control, acquisition and analysis software for precise operation. Safe, rapid cooling of the test fluid is provided by the mechanical refrigeration system.
HM-73 ATS Touch Screen Bending Beam Rheometer retains all of the performance features of the HM-59, but incorporates a state-of-the-art touch-screen design for easy set up and operation. The touch-screen controller has walk through menus for guidance and the machine can be started, stopped and monitored remotely through an App installed on a smartphone, iPad, or tablet. The user-friendly control, acquisition and analysis software is preloaded on the internal computer and allows daily verification and periodic calibration of load cell, LVDT, and RTD transducers. A USB port is located on the front of the unit for software upgrades and data storage.
Features:
Included Items:
OR
Accessories Included With Both Models:
Optional Accessories:
Applied Test Systems has been manufacturing custom furnaces and ovens since 1965, and entered into the bitumen / asphalt binder market in the early 1990’s with the introduction of Superpave! It only seems logical to expand our many years of industry and process heating knowledge into the creation of the Applied Test Systems Rolling Thin Film Oven, the RTFO Touch.
The NEW RTFO Touch from ATS has been designed to simulate short-term aging of asphalt binder according to ASTM D2872, AASHTO T240, EN 12607, Superpave, and California Test Method 346 test standards and now offers customizable options to accommodate a broad spectrum of users.
DSR Bitumen Rheometer measuring place
speed range: 0,1 ... 1000 rpm
speed resolution: 0.015 rpm
temperature range: -10 ... +150°C
angle range: -50 ... 300°
angle resolution: 0,001°
frequency range: 0,001 ... 10Hz
torque: 0,1 ... 150 mNm
torque resolution: 0.002 mNm
supply voltage: 230 V AC ±10 %; 49 ... 61 Hz
supply voltage: 110 V AC ±10 %; 49 ... 61 Hz
configuration:
- Basic instrument Rheometer 1 including:
measuring head, stand, control unit
- Plate-plate-measuring system, peltier temperated consists of:
peltier control unit, peltier temperated basic plate,
basic plate support, adapter, exchange grip, exchangeable plate (ø 25mm),
measuring plate P3 (ø 25mm), measuring plate P4 (ø 8mm)
- Software for Bitumen tests acc. DIN EN 14770, ASTM D7175-08, ASTM D 4402 / D4402 M, ASTM D7405-10a, AASHTO T350-14, AASHTO M332-14, AASHTO T315-12,
AASHTO TP 70, AASHTO M320-10
for test execution of
AASHTO TP70, AASHTO T 350-14 and AASHTO M332-14) and
AASHTO T315-12, AASHTO M320-10 and DIN EN 14770),
as well as display and analysis of measuring data
- 1 set of trimming tools, 1 set of rubber moulds
system requirements for Software
- computer operating system Windows XP SP3, Windows 7 or above
- Microsoft.NET Framework 3.5 or above (normally included in computer operating system)
- processor: at least Pentium 4 or matchable, frequency of 1,7GHz or above
- working storage at least 1 Gbyte
- free memory space on harddisk of 10 MB
- 1 CD-ROM device
- 2 COM or USB interfaces for rheometer and thermostate / cryostate
- option printer port with printer
Market proven worldwide, the Malvern DSR dynamic shear rheometer has been specifically designed to satisfy the demands of high throughput grade testing of Asphalt binders (bitumen), to AASHTO (American Association of State Highway and Transportation Officials) industry standards.
Overview
The Malvern DSR asphalt rheometer is proven as the benchmark system for Quality Control testing to industry standards in regulated markets worldwide.
Specification
If you are unsure as to specifying an appropriate rheometer model for your application, Malvern recommend contacting us for further advice and/or a sample test and evaluation report.
رئومتر برشی دینامیکی (DSR)
شامل سیستم اندازه گیری، پایه و یونیت کنترل، با رنج سرعت 0.1 تا 1000 دور در دقیقه با دقت 0.015،
با رنج دمایی 10- تا 150 درجه سانتی گراد، رنج فرکانس 0.001 تا 10 هرتز، گشتاور 0.1 تا 150 با دقت 0.002،
دارای صفحات فلزی 8 و 25 میلی متری، دارای نرم افزار جهت ارائه تنش و کرنش برشی، مدول برشی و زاویه اختلاف فاز،
قابلیت اندازه گیری Oscillation، ویسکوزیته بر حسب CR-Test (نرخ برش) و CS-Test (نرخ تنش)
ساخت کمپانی Infratest آلمان