Cement - Mortar

Quick Find Products

×

Warning

JUser: :_load: Unable to load user with ID: 711

Cooling Thermostatically Controlled Water Bath, Digital

Provides water at the required temperature of 25 ±0.1°C.
The unit consists of a stainless steel water bath 18 litres capacity with wool insulation, immersion heater with digital thermostat, motor pump with connections and cooling coil device.
The bituminous sample is immersed into the water bath, and placed on the penetrometer only at the time of the test, by eventually using the transfer dish.

Cooling Thermostatically Controlled Water Bath, Digital

Provides water at the required temperature of 25 ±0.1°C.
The unit consists of a stainless steel water bath 18 litres capacity with wool insulation, immersion heater with digital thermostat, motor pump with connections and cooling coil device.

حمام آب دیجیتال (دارای سیستم خنک کننده)

دارای محفظه استیل، با قابلیت تنظیم دما در محدوده دمایی 15 تا 100 درجه سانتی گراد با دقت 0.1، دارای نمایشگر دیجیتال و پمپ سیرکوله، ساخت کمپانی ATP

حمام آب دیجیتال (دارای سیستم خنک کننده)

دارای محفظه استیل، با قابلیت تنظیم دما در محدوده دمایی 15 تا 100 درجه سانتی گراد با دقت 0.1، دارای نمایشگر دیجیتال و پمپ سیرکوله، ساخت کمپانی ATP

The equipment consists of a compact benchtop circulation cooler to be placed below the bench supporting the penetrometer: thanks to a built-in cooling compressor, temperature can be maintained in a range from 0 to 50°C with 0.1°C precision. A pump permits to circulate the liquid in the transfer dish placed on the penetrometer.

  • Enamel finished benchtop steel case.
  • Stainless steel inside tank, 10 liter capacity, thermally insulated. 
  • Stainless steel cover.
  • Electric pump with overload protection. The pump is equipped also with a propeller to stir the liquid in the tank.
  • Stainless steel heater.
  • Air cooled hermetically-sealed single stage cooling compressor placed aside the tank. Chromium plated cooling coil. CFC/HCFC-free gas is used to fill the circuit.
  • Microprocessor thermoregulator with PID action and built-in digital display 0.1 °C accuracy. Probe: Pt100 RTD. The heater is piloted through a SSR.
  • Safety device against over-temperature and low-level: it cut off the power supply and light a lamp on the control panel in case of alarm.
  • 3 m thermally insulated tubing to connect to the transfer dish.
  • Easy access control box containing all the electronics: anodized aluminium panel with English written indications.
  • English written user manual.
  • For 230 V/50 Hz connection. Power consumption: 500 W approx.
  • Dimensions (l x w x h): 500 x 400 x 500 mm approx. Weight: 25 kg approx.

Double walled all stainless steel made, with wool insulation and water circulation electric stirrer, the bath ensures an uniform and constant temperature.
Temperature range: from ambient to +60°C. with accuracy of
+/- 0,4°C. at 20°C.
The bath is equipped with digital thermostat and a dual safety thermostat with higher thermic threshold ensuring safe working conditions.
A cooling coil device to be connected to the water net is used when room temperature exceeds the requested one, with possibility to reduce the bath temperature within the room and water net conditions.
The specimens are held by a perforated shelf spaced from the bottom.

E136-01 specifications:

Internal dimensions: 900x600x360 mm
Overall dimensions: 1050x680x430 mm
Power supply: 230V 1ph 50/60Hz 2400W
Weight: 55 kg approx.

Thermostatic bath/circulator with simplest operation and integrated cooling system

The cooling technology of the cooling thermostats RA 8, RA 12 and RA 24 enables cooling performance through the entire temperature range of -25 up to 100 °C

Working temperature min.

°C

-25

Working temperature max.

°C

100

Ambient temperature min.

°C

5

Ambient temperature max.

°C

40

Temperature stability

±K

0.05

Cooling output at 20°C measured with ethanol

kW

0.23

Cooling output at 10°C measured with ethanol

kW

0.19

Cooling output at 0°C measured with ethanol

kW

0.16

Cooling output at -10°C measured with ethanol

kW

0.13

Cooling output at -20°C measured with ethanol

kW

0.08

Cooling output at -25°C measured with ethanol

kW

0.03

Application

 

external, External and inside the bath, Inside the bath

Heater power

kW

1.50

Power consumption

kW

1.80

Bath volume min.

L

5

Bath volume max.

L

7.50

Bath opening width

mm

165

Bath opening depth

mm

177

Bath depth

mm

160

usable depth

mm

140

Dimensions (WxDxH) in mm

 

235x500x605

Ø nipples

mm

13

Pump pressure max.

bar

0.20

Pump flow max. (pressure)

L/min

15

Thermostatic bath/circulator with simplest operation and integrated cooling system

The cooling technology of the cooling thermostats RA 8, RA 12 and RA 24 enables cooling performance through the entire temperature range of -25 up to 100 °C.

Working temperature min.

°C

-25

Working temperature max.

°C

100

Ambient temperature min.

°C

5

Ambient temperature max.

°C

40

Temperature stability

±K

0.05

Cooling output at 20°C measured with ethanol

kW

0.43

Cooling output at 10°C measured with ethanol

kW

0.37

Cooling output at 0°C measured with ethanol

kW

0.33

Cooling output at -10°C measured with ethanol

kW

0.23

Cooling output at -20°C measured with ethanol

kW

0.08

Cooling output at -25°C measured with ethanol

kW

0.02

Application

 

external, External and inside the bath, Inside the bath

Heater power

kW

1.50

Power consumption

kW

1.80

Bath volume min.

L

14

Bath volume max.

L

22

Bath opening width

mm

350

Bath opening depth

mm

277

Bath depth

mm

160

usable depth

mm

140

Dimensions (WxDxH) in mm

 

415x605x605

Ø nipples

mm

13

Pump pressure max.

bar

0.20

Pump flow max. (pressure)

L/min

15

Thermostatic bath/circulator with simplest operation and integrated cooling system

The cooling technology of the cooling thermostats RA 8, RA 12 and RA 24 enables cooling performance through the entire temperature range of -25 up to 100 °C.

Working temperature min.

°C

-25

Working temperature max.

°C

100

Ambient temperature min.

°C

5

Ambient temperature max.

°C

40

Temperature stability

±K

0.05

Cooling output at 20°C measured with ethanol

kW

0.33

Cooling output at 10°C measured with ethanol

kW

0.30

Cooling output at 0°C measured with ethanol

kW

0.26

Cooling output at -10°C measured with ethanol

kW

0.21

Cooling output at -20°C measured with ethanol

kW

0.08

Cooling output at -25°C measured with ethanol

kW

0.03

Application

 

external, External and inside the bath, Inside the bath

Heater power

kW

1.50

Power consumption

kW

1.80

Bath volume min.

L

9.50

Bath volume max.

L

14.50

Bath opening width

mm

300

Bath opening depth

mm

203

Bath depth

mm

160

usable depth

mm

140

Dimensions (WxDxH) in mm

 

365x500x605

Ø nipples

mm

13

Pump pressure max.

bar

0.20

Pump flow max. (pressure)

L/min

15

Thermostatic bath/circulator with simplest operation and integrated cooling system

The cooling technology of the cooling thermostats RA 8, RA 12 and RA 24 enables cooling performance through the entire temperature range of -25 up to 100 °C

Working temperature min.

°C

-25

Working temperature max.

°C

100

Ambient temperature min.

°C

5

Ambient temperature max.

°C

40

Temperature stability

±K

0.05

Cooling output at 20°C measured with ethanol

kW

0.23

Cooling output at 10°C measured with ethanol

kW

0.19

Cooling output at 0°C measured with ethanol

kW

0.16

Cooling output at -10°C measured with ethanol

kW

0.13

Cooling output at -20°C measured with ethanol

kW

0.08

Cooling output at -25°C measured with ethanol

kW

0.03

Application

 

external, External and inside the bath, Inside the bath

Heater power

kW

1.50

Power consumption

kW

1.80

Bath volume min.

L

5

Bath volume max.

L

7.50

Bath opening width

mm

165

Bath opening depth

mm

177

Bath depth

mm

160

usable depth

mm

140

Dimensions (WxDxH) in mm

 

235x500x605

Ø nipples

mm

13

Pump pressure max.

bar

0.20

Pump flow max. (pressure)

L/min

15

Page 1 of 2