Coring machine used in the laboratory, to obtain cores from irregular rock samples. To be used with the Core Drilling Barrels (accessory A137-04÷A139-04).
The 2 speed electric motor 1140/2040 rpm at free load and 730/1340 rpm at max load, is equipped with friction device and double safe isolation to CE Directive.
Complete with specimen’s clamp device, water cooling system and water tank.
Power supply: 230 V 50/60 Hz 1ph 1800W
Weight: 60 kg approx.

Comprising:
C321-10 UNIVERSAL DRILLING FRAME COMPLETE, but without electric motor
C330 ELECTRIC MOTOR COMPLETE
Coring angle: 0 to 360°

The excursion group is rectified to assure a very soft and accurate drilling movement. The excursion is 550 mm.
Electric motor at three speeds: 670, 1140, 1580 rpm with speed reducer, provided of friction device and switch to CE Safety Directive.
The height of the vertical column is 1000 mm and it is pre-built for extension column connection (accessory mod. C322-01).

Power supply: 230 V 1ph 50/60Hz 2200 W
Dimensions: 440x750x1300 mm
Weight: 85 kg

- Three speed electric motor with friction device
- Connection to coolant water supply
- Rectified excursion group
- Coring angle: 0 to 360°
- Robust, compact, wheels mounted

Pavement core drilling machine 12,5HP 4-stroke petrol engine, Same to mod. C319, but activated by a petrol engine 12,5 HP power 4-stroke Briggs & Stratton model.

Weight: 150 Kg

This rugged, compact and por table machine with vertical screw feed, is used for pavement core sampling where it is not easy to get electrical power.
Petrol engine 5 HP power, 4-cycle Briggs & Stratton model.

Dimensions: 850x580x1230 mm
Weight: 135 Kg

The frame and the electric motor are the same of mod. C318N.
The machine is supplied complete with lubricated vacuum pump and pressure accumulation reservoir, which is very useful because it maintains for some times a valid vacuum level also with electric blackout, by avoiding the fall or disconnection of the unit from the wall.
The pump is connected to the utility by means of a ball tap to which a vacuum gage is fitted, that constantly indicates the pressure inside the tank.
Coring angle: 0 to 360° under the condition that the surface is sufficiently flat, and not too porous, to allow the vacuum attachment.

Power supply: 230V 1ph 50/60Hz 2200W
Dimensions: 600x320x1020 mm + pump
Weight: 24 kg + pump 15 kg

Electric motor at three speeds: 530, 1280, 1780 rpm, with speed reducer, provided of multifunction electronic friction device and switch to CE Safety Directive.

The machine accepts bits dia. 50 to 150 mm

Power supply: 230 V 1 ph 50/60Hz 2200 W
Dimensions: 600x320x1020 mm
Weight: 24 kg

دستگاه مغزه گيري آزمايشگاهي ،

دارای موتور الکتریکی با دو سرعت 1500/2700rpm (دور در دقیقه) داراي گيره نگهدارنده نمونه، سيستم خنك كننده آب ومخزن آب جهت مغزه گيري ازنمونه هاي سنگي بی قاعده قابل استفاده بااستوانه های مغزه گيري همراه با مته نمونه گیری A 137-04 با طول 200mm

ساخت كمپانيMatest ايتاليا