General Equipment

Quick Find Products

Viscometer Bath

February 04th, 2019

This viscometer bath is used to determine both the Dynamic and Kinematic viscosity of liquid asphalts, keeping the capillary type viscometers at a uniform temperature.

Consisting of:

  1. Borosilicate glass container 10 liters capacity
  2. Motor stirrer, heating element
  3. Selector and digital temperature reading
  4. Stainless steel lid with four holes for capillaries

Temperature range: ambient to 160 °C
Allows to simultaneous temperate four capillaries.
Power supply: 220/230V 1ph 50-60Hz 750W
Dimensions: 52x31x47 cm
Weight: 12 kg approx.

Viscometer Bath

February 04th, 2019

This viscometer bath is used to determine both the Dynamic and Kinematic viscosity of liquid asphalts, keeping the capillary type viscometers at a uniform temperature.

Consisting of:

  1. Borosilicate glass container 10 liters capacity
  2. Motor stirrer, heating element
  3. Selector and digital temperature reading
  4. Stainless steel lid with four holes for capillaries

Temperature range: ambient to 160 °C
Allows to simultaneous temperate four capillaries.
Power supply: 220/230V 1ph 50-60Hz 750W
Dimensions: 52x31x47 cm
Weight: 12 kg approx.

Viscometer Bath

February 04th, 2019

This viscometer bath is used to determine both the Dynamic and Kinematic viscosity of liquid asphalts, keeping the capillary type viscometers at a uniform temperature.

Consisting of:

  1. Borosilicate glass container 10 liters capacity
  2. Motor stirrer, heating element
  3. Selector and digital temperature reading
  4. Stainless steel lid with four holes for capillaries

Temperature range: ambient to 160 °C
Allows to simultaneous temperate four capillaries.
Power supply: 220/230V 1ph 50-60Hz 750W
Dimensions: 52x31x47 cm
Weight: 12 kg approx.

Procedure for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer. The dynamic viscosity can be obtained by multiplying the kinematic viscosity by the density of the liquid.

Procedure for the determination of kinematic viscosity of liquid asphalts (bitumens), road oils and distillation residues of liquid asphalts (bitumens) all at 60°C (140°F) and of asphalt cements at 135°C (275°F) in the range from 6 to 100.000 mm2/s (cSt).

For the determination of the kinematic viscosity of bituminous binders at 60°C and 135°C in the ranfge from 6 to 300.000 mm2/s (cSt). Bituminous Emulsions are not covered within the scope of this method..

For the determination of the kinematic viscosity with glass capillary viscometer. Borosilicate tank, cover with 5 holes 50.8 mm, leakage protection vessel made of tempered glass supplied with cork disk supporting and stainless steel base, stainless steel control box on the cover, temperature controlled by digital thermoregulator PID with PT100 probe class A and overtemperature alarm, stainless steel heater, cooling coil for improved control near to ambient temperature, motor stirrer, safety internal level for low liquid with warning lamp. With stand-by stainless steel covers.

- Temperature: from ambient to 150°C (302°F)
- Stability: ±0.1°C
- Bath capacity: about 15 liters
- Power supply: 220V 50/60 Hz
- Power: 1200W
- Dimensions: 35x35x52 cm
- Weight: 15 kg.