The Seta Ash Furnace has a maximum temperature of 1100°C, it incorporates pre-heated airflow system and extended chimney.
The furnace is supplied with an Inconel tray complete with detachable handle, it features a door safety power cut-off switch as well as over-temperature cut out protection. The chambers of the furnace are ceramic muffles wound with resistance wire.

The digital temperature controller uses PID (Proportional Integral Derivative) temperature control to give excellent temperature control when properly set. This type of control uses a complex mathematical control system to adjust the power being sent to the elements and to hold the furnace at the desired temperature. Supplied with: laboratory tongs, gloves, 5 x 100ml and 5 x 120ml tall form porcelain crucibles.

دستگاه تعیین درصد خاکستر

جهت تعیین میزان خاکستر در محدوده 0.001 ± 0.18 درصد از سوخت های باقی مانده، سوخت های توربین گاز، روغن های خام، روغن های روان کننده، واکس ها و سایر محصولات نفتی

عایق حرارتی ساخته شده از فیبر سرامیک جهت گرمایش سریع با مصرف محدود انرژی و سیستم حرارتی مغناطیسی برای سیستم حفاظتی
- درجه حرارت: از دمای محیط تا 1100 درجه سانتی گراد (2012 درجه فارنهایت)
- منبع تغذیه: 220ولت ، ۵۰/۶۰ هرتز
- قدرت: 2300 وات
- ابعاد: ۴۰*۵۸*۵۴سانتیمتر خارجی / ۱۴.۵*۲۵*۱۰ سانتیمتر داخلی
- وزن: 40 کیلوگرم

ساخت کمپانی SDM ایتالیا

The determination of ash in the range 0.001�0.18 mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lubricating oils, waxes, and other petroleum products, in which any ash-forming materials present are normally considered to be undesirable impurities or contaminants. The test method is limited to petroleum products which are free from added ash-forming additives, including certain phosphorus compounds.

The determination of the sulfated ash from unused lubricating oils containing additives and from additive concentrates used in compounding. These additives usually contain one or more of the following metals: barium, calcium, magnesium, zinc, potassium, sodium, and tin. The elements sulfur, phosphorus, and chlorine can also be present in combined form. Application of this test method to sulfated ash levels below 0.02 mass % is restricted to oils containing ashless additives. The lower limit of the test method is 0.005 mass % sulfated ash.

The heat insulation is made in ceramics fibre in order to get a speed heating with a limited energetic consumption. Heating muffle, unthreaded from the back, in an only cast of refractary cordieletic material to provide for thermic joilts. Resistors in KANTHAL screened. Lateral opening door with pressure wedge and with a stop device for electric feeding when it opens, allowing the worker, during the loading and unloading of the muffle, to act with the utmost safety avoiding the contact with the burning part. Natural draught posterior exhaust of the smokes. Control panel is positioned onthe furnace bottom containing a digital visualized thermoregulator and magnetic thermic for protection system.

- Temperature: from ambient to 1100°C (2012°F)
- Power supply: 220V 50/60Hz
- Power: 2300W
- Dimensions: 40x58x54 cm external 14.5x25x10 cm internal
- Weight: 40 kg