Petroleum
Quick Find Products
Oil Test Centrifuge - 4 place
December 02nd, 2017
This purpose-made Oil Test Centrifuge is fully programmable allowing automatic configuration to the specified oil test parameters. A four place swing out rotor and universal bucket assembly accommodates low cost adaptors and cushions suitable for borosilicate glass centrifuge tubes of the types specified for oil testing: 6 or 8 inch conical, 8 inch trace sediment, 8 inch pear-shaped or 12.5ml. To reduce errors in measurement of tube content, the rotor design allows tubes to stand in a near upright (vertical) position at rest
|
Maximum Relative Centrifugal Force (RCF) |
2214g |
|
Maximum Rotational Speed |
3000 rev/min |
|
Temperature Range |
30 to 80°C ±1°C at 60°C |
|
Timer Range |
10 seconds to 59 minutes 50 seconds (10 second steps) up to 1 hour run time. After 1 hour run time the centrifuge run time is 1 hour to 99 hours 59 minutes (only 1 minute steps are possible). Continuous running until manually stopped |
|
Control |
Microprocessor with 99 memory capacity |
|
Capacity |
4 Samples |
|
Voltage range |
220/240V, 50/60Hz (Optional transformer for 110/120V) |
|
Power |
950W |
|
Size (HxWxD) |
40.1 x 56.41 x 63.93cm |
|
Weight |
72.5kg |