Sulfur-in-oil analysis, announces the launch of the new SLFA-6100/6800 Energy Dispersive X-Ray Fluorescence Analyzer, which measures sulfur in oil ranging from 5ppm to 9.9999%. This new, compact, and accurate analyzer meets the needs of anyone wishing to conform to ASTM D4294, ISO 8754 or JIS K2541/B7995.
The SLFA-6X00 series has an optimized user interface, which includes full-color monitor, USB output, data printout mode option and smaller footprint with a sophisticated look. A shutter shield has once again been adopted to prevent X-Ray leakage, along with a new key switch function and a newly designed turntable.
The measurement is set between 10 to 600 seconds.
Up to 8 samples on SLFA-6800 turntable are analyzed with the pre-set condition.
After selecting the calibration curves and measurement conditions (or select the correct calibration curve using the “A” mode), simply press the “MEAS” button to start the measurement.
The software allows up to 5 sets of 3 calibration curves, to increase the accuracy and usability
Model RX-620SA determines total sulfur in petroleum products using energy-dispersive X-ray fluorescence (EDXRF) method, which is a quick, non-destructive, economical but yet accurate method.
Once a sample is set, the total sulfur is determined automatically in 300sec (typical).
RX-620SA is equipped with a 12-position carrousel, for higher productivity.
Test Methods |
ISO 8754, ASTM D4294-03, etc. |
Carrousel |
12 positions |
Range |
0.003 to 6.00mass% |
Repeatability |
10 mg/kg (as per ASTM D4294 designation)* at 0.008mass% |
Size / weight |
560(W) × 515(D) × 245(H) mm / 29kg |
Power consumption |
200W |
Model RX-360SH is a single test version of X-ray sulfur meter taking the same measuring principle as that of RX-620SA. Compact housing with a carrying handle and 2-way power source (100-240VAC or 12VDC battery) allows such applications as spot-checking in the field. The only consumable are small piece of Mylar film and printing paper, making the running cost at minimal.
Test Methods |
ISO 8754, ASTM D4294-03, etc. |
Range |
0.003 to 6.00mass% |
Repeatability |
10 mg/kg (as per ASTM D4294 designation)* at 0.008mass% |
Size / weight |
420(W) × 350(D) × 140(H) mm / 12.5kg |
Power consumption |
100W |