James Bond Test ™ MK III
For Testing Tensile Strength of Overlays, and Overlayments
The James Bond Tester™ MK III or pull off adhesion test measures the bond strength or tensile strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. By pulling a 25mm steel disk attached to the material under the unit can,
- Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay
- Determine the bond strength of a repair or overlay material after it is applied to the substrate
- Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface
The James Bond Tester™ MK III has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials or coatings.
Features and Benefits
- Accurate bond strength of repair mortars, epoxy resins, laminates, overlays, and other coatings.
- Calibrated gauge with maximum load indicator and mechanical damping.
- Ball Joint Design for rapid testing as well as assuring direct tensile loading
- Adjustable alignment plate with built in leveling facility for both vertical and horizontal pulls.
- Compact design.
Gauge Specifications |
||||
Range |
Increments |
Maximum Load Indicator |
Mechanical Dampened Movement |
Diameter |
0.2 KN / 50 lbf |
Yes |
Yes |
70 mm / 2.5" |
|
1.0 KN / 200 lbf |
Yes |
Yes |
70 mm / 2.5" |
Diameter |
Horizontal and Vertical Level |
Easy Thumb Screw Adjustment Knobs |
150 mm / 6" |
Yes |
Yes |
Bond Test Puller Assembly |
||
Diameter |
Height |
Maximum Load |
60 mm / 2.5" |
210mm / 8.125" |
30 KN / 6675 lbf |
Bond Test Assembly (Alignment Plate Attached to Bond Test Puller Assembly) |
||
Height |
Width |
Weight |
240 mm / 9.375" |
3010 mm / 12.5" |
5 Kg / 11 lbs. |
James Bond Tester™ MK III in Case |
|||
Height |
Width |
Depth |
Weight |
410mm / 16" |
508mm / 20" |
205mm / 8" |
14 Kg / 31 lbs. |