Ohmcorr Test System
Resistivity Meter for Concrete
Resistivity meter to assess corrosion currents in concrete.
Features & Benefits
· RESISTIVITY LEVEL · (K OHMS CM) · <5 · 5 to 10 · 10 to 20 · >20 |
POSSIBLE CORROSION RATE OF REINFORCEMENT REBARS Very High High Moderate to Low Insignificant |
The James OhmCorr™, when used in conjunction with the James CorMap™ System provides an economic and sound means of diagnoses of corrosion in reinforced concrete.
Specifications
Weight complete in carrying case |
8 lbs (4 kilos) |
Display: |
4-1/2†Digit in LCD |
Resolution: |
± 0.1K ohms cm (± 1 Digit) |
Range: |
0.5 - 20K ohms cm |
Battery: |
9 Volt |
The apparatus, suitable for the execution of the test at 50°C, consists of a steel case containing a stainless steel bath with a four-hole cover for the test tubes and a manifold for connecting water to the condensers.
IP0227-100 Four-place unit
IP0227-110 Six-place unit
IP0227-120 Eight-place unit
ACCESSORIES
IP0227-A00 ASTM comparative table
IP0227-A01 Strip vise for four strips
CAL001 PT100 simulator
CAL002 Officially certified PT100 simulator
CONSUMABLES
IP0227-C00 Amber-glass sample container
IP0227-C01 Amber-glass condenser
IP0227-C02 Silver strip support
IP0227-C03 Silver strip
IP0227-C04 Pack of 12 abrasive paper sheets, 240 grit
IP0227-C05 Pack of 12 abrasive paper sheets, 150 grit
IP0227-C06 Silicone carbide powder, 150 grit, 0.5 kg
TA012C-N00 ASTM 12C thermometer (-20°C/+102°C)
The apparatus consists of a base supporting one or two heat-transfer corrosion cells. Cells are rated for a working pressure up to 40 psi and working temperature up to 160 °C. An electronic timer permits to set the test duration while an electronic thermostat is used to control the temperature.
AD4340-100 Single-unit apparatus
AD4340-110 Double-unit apparatus
ACCESSORIES
CAL001 PT100 simulator
CAL002 Officially certified PT100 simulator
CONSUMABLES
AD4340-C00 Specimens
AD4340-C01 Pyrex glass cell
AD4340-C02 Viton gasket
AD4340-C03 Type K thermocouple
The apparatus, consists of a benchtop steel case containing a stainless steel bath: the cover has a series of holes suitable for both glassware for copper and silver strip corrosion tests and vessels for copper strip corrosion test. Two manifolds permit to easily connect cooling water to silver corrosion glassware.
AD0130-200 Four-place unit. Dimensions (l x w x h): 760 x 400 x 900 mm. Weight 45 kg approx.
AD0130-210 Six-place unit. Dimensions (l x w x h): 860 x 400 x 900 mm. Weight 55 kg approx.
AD0130-220 Eight-place unit. Dimensions (l x w x h): 960 x 400 x 900 mm. Weight 65 kg approx.
ACCESSORIES FOR ASTM D 130
AD0130-A00 Stainless steel corrosion test vessel
AD0130-A01 Test tube support (for 3 test tubes)
AD0130-A02 ASTM Copper Strip Corrosion Standard
AD0130-A03 Strip vise for one strips
AD0130-A04 Strip vise for four strips
CONSUMABLES FOR ASTM D 130
AD0130-C00 Glass test tube Ø 26 mm
AD0130-C01 O-Ring seal for test vessel
AD0130-C02 Copper strip 75 x 12.5 x 3 mm
AD0130-C03 Silicon carbide paper, 240 grit, 12 sheets
AD0130-C04 Silicon carbide paper, 150 grit, 12 sheets
AD0130-C05 Silicon carbide grains, 150 grit, 0.5 kg
AD0130-C06 Viewing test tube
TA012C-N00 ASTM 12C thermometer (-20°C/+102°C)
ACCESSORIES FOR IP 227
IP0227-A00 ASTM D 1660 comparative table
IP0227-A01 Strip vise for four strips
CONSUMABLES FOR IP 227
IP0227-C00 Amber-glass sample container
IP0227-C01 Amber-glass condenser
IP0227-C02 Silver strip support
IP0227-C03 Silver strip
IP0227-C04 Silicon carbide paper, 240 grit, 12 sheets
IP0227-C05 Silicon carbide paper, 150 grit, 12 sheets
IP0227-C06 Silicone carbide grains, 150 grit, 0.5 kg
GENERIC ACCESSORIES
CAL001 PT100 simulator
CAL002 Officially certified PT100 simulator
The apparatus, suitable for the execution of the test at 40, 50 and at 100°C, consists of a benchtop steel case containing a stainless steel bath with a four-hole cover to allow the introduction of the vessels or the test tubes and a control box containing all the electronics.
AD0130-100: Apparatus for four vessels with water bath. Dimensions (l x w x h): 640 x 400 x 600 mm. Weight: kg 40 approx.
AD0130-110: Apparatus for six vessels with water bath. Dimensions (l x w x h): 700 x 400 x 600 mm. Weight: kg 45 approx.
AD0130-120: Apparatus for eight vessels with water bath. Dimensions (l x w x h): 760 x 400 x 600 mm. Weight: kg 50 approx.
AD0130-300: Apparatus for four vessels with aluminium block.
ACCESSORIES
AD0130-A00 Stainless steel corrosion test vessel
AD0130-A01 Test tube support (for 3 test tubes)
AD0130-A02 ASTM Copper Strip Corrosion Standards
AD0130-A03 Strip vise for one copper strip
AD0130-A04 Strip vise for four copper strips
CAL001 PT100 simulator
CAL002 Officially certified PT100 simulator
CONSUMABLES
AD0130-C00 Glass test tube Æ 26
AD0130-C01 O-Ring for vessel
AD0130-C02 Copper strip 75 x 12.5 x 3 mm
AD0130-C03 Silicon carbide paper, 240 grit (pack of 12 sheets)
AD0130-C04 Silicon carbide paper, 150 grit (pack of 12 sheets)
AD0130-C05 Silicon carbide grains (0.5 Kg pack)
AD0130-C06 Viewing test tube
TA012C-N00 ASTM 12C thermometer (-20°C/+102°C)